Veritas Storage Foundation 5.1 SP1 Cluster File System Administrator"s Guide (5900-1738, April 2011)

To add new disks from a recovered site to the coordinator diskgroup
1
Make sure system-to-system communication is functioning properly.
2
Make sure that the cluster is online.
# vxfenadm -d
I/O Fencing Cluster Information:
================================
Fencing Protocol Version: 201
Fencing Mode: SCSI3
Fencing SCSI3 Disk Policy: dmp
Cluster Members:
* 0 (galaxy)
1 (nebula)
RFSM State Information:
node 0 in state 8 (running)
node 1 in state 8 (running)
3
Verify the name of the coordinator diskgroup.
# cat /etc/vxfendg
vxfencoorddg
4
Run the following command:
# vxdisk -o alldgs list
DEVICE TYPE DISK GROUP STATUS
c1t1d0 auto:cdsdisk - (vxfencoorddg) online
c2t1d0 auto - - offline
c3t1d0 auto - - offline
5
Verify the number of disks used in the coordinator diskgroup.
# vxfenconfig -l
I/O Fencing Configuration Information:
======================================
Count : 1
Disk List
Disk Name Major Minor Serial Number Policy
/dev/vx/rdmp/c1t1d0 32 48 R450 00013154 0312 dmp
93Administering Storage Foundation Cluster File System and its components
Administering I/O Fencing