Veritas Storage Foundation 5.1 SP1 Cluster File System Administrator"s Guide (5900-1738, April 2011)
are several other packages supplied by VCS that provide application failover
support when installing SFCFS HA.
See the Veritas Storage Foundation Cluster File System Installation Guide.
SFCFS also requires the cluster functionality (CVM) of the Veritas Volume Manager
(VxVM) to create the shared volumes necessary for mounting cluster file systems.
For more information on these products, refer to the Veritas Volume Manager
and Veritas Cluster Server documentation.
Administering CFS
This section describes some of the major aspects of cluster file system
administration.
This section provides instructions for the following CFS administration tasks:
■ Using cfsmount to mount CFS file systems
See “Using cfsmount to mount CFS file systems” on page 56.
■ Resizing CFS file systems
See “Resizing CFS file systems” on page 57.
■ Verifying the status of CFS file systems
See “Verifying the status of CFS file systems” on page 57.
■ Verifying CFS port
See “Verifying CFS port” on page 57.
If you encounter issues while administering CFS, refer to the troubleshooting
section for assistance.
Using cfsmount to mount CFS file systems
To mount a CFS file system using cfsmount:
# cfsmount /oradata1
Mounting...
[/dev/vx/dsk/oradatadg/oradatavol]
mounted successfully at /oradata1 on galaxy
[/dev/vx/dsk/oradatadg/oradatavol]
mounted successfully at /oradata1 on nebula
Administering Storage Foundation Cluster File System and its components
Administering CFS
56