Veritas Storage Foundation 5.1 SP1 Cluster File System Administrator"s Guide (5900-1738, April 2011)

About I/O fencing configuration files
Table 2-1 lists the I/O fencing configuration files.
Table 2-1
I/O fencing configuration files
DescriptionFile
This file stores the start and stop environment variables for I/O fencing:
VXFEN_STARTDefines the startup behavior for the I/O fencing module after a system
reboot. Valid values include:
1Indicates that I/O fencing is enabled to start up.
0Indicates that I/O fencing is disabled to start up.
VXFEN_STOPDefines the shutdown behavior for the I/O fencing module during a system
shutdown. Valid values include:
1Indicates that I/O fencing is enabled to shut down.
0Indicates that I/O fencing is disabled to shut down.
The installer sets the value of these variables to 1 at the end of Storage Foundation Cluster File
System HA configuration.
/etc/rc.config.d/
vxfenconf
This file includes the coordinator disk group information.
This file is not applicable for server-based fencing.
/etc/vxfendg
37Storage Foundation Cluster File System architecture
About I/O fencing