Veritas Storage Foundation 5.1 SP1 Cluster File System Administrator"s Guide (5900-1738, April 2011)

Table 3-4
CP server deployment and migration scenarios (continued)
Action requiredSFCFS clusterCP serverScenario
Note: Migrating from fencing in disabled mode to
customized mode incurs application downtime.
On the designated CP server, prepare to configure the new
CP server.
See the Veritas Storage Foundation Cluster File System
Installation Guide for this procedure.
On the SFCFS cluster nodes, perform the following
tasks:
1
Stop all applications, VCS, and fencing on the SFCFS
cluster.
2
To stop VCS, use the following command (to be run
on all the SFCFS cluster nodes):
# hastop -local
3
Stop fencing using the following command:
# /sbin/init.d/vxfen stop
4
Reconfigure fencing on the SFCFS cluster.
See the Veritas Storage Foundation Cluster File System
Installation Guide for the procedures.
Existing SFCFS
cluster with
fencing
configured in
disabled mode
Operational CP
server
Enabling fencing
in a SFCFS cluster
with an
operational CP
server
coordination point
Administering Storage Foundation Cluster File System and its components
Administering I/O Fencing
108