VERITAS Storage Foundation 4.1 Oracle Administrator's Guide

Chapter 12, Using the VERITAS Storage Foundation for Oracle Graphical User Interface
Prerelease 8 September 2005, 8:55am Managing Snapshots with Database FlashSnap
309
▼
To validate or modify a snapplan
1. Click a specific snapplan in the object tree. (You may need to expand the tree view to find the
icon.)
2. Select one of the following methods to validate or modify a snapshot plan.
◆ From the menu bar, select Snapplan > Modify/Validate Snapplan.
or
◆ Right click the snapplan to bring up a pop-up menu. Then click Modify/Validate
Snapplan.
The Modify/Validate Snapplan wizard is displayed.
3. If incorrect, enter the path and file name of the snapplan in the Snapplan file field. Then, click
Next to continue.
4. If you are modifying your snapplan, enter any new parameters that should be updated. You are
not required to do anything if no changes are required.
Note For more information regarding the snapplan parameters, see “Creating and Working with
Snapplans Using dbed_vmchecksnap” on page 453.
5. Click Validate to check that the settings have been configured correctly.
6. At the confirmation prompt, click Ye s to confirm that you want to validate the snapplan.
If the snapplan was successfully validated, you will receive a confirmation message.
7. To see the snapplan details, click the Show details checkbox. The snapplan details are
displayed in the pop-up window.
When you have finished reviewing them, click OK. The following example is similar to what
you should see:
PRIMARY_HOST is host1
SECONDARY_HOST is host2
The version of PRIMARY_DG-PRODdg is 110.
SNAPSHOT_DG is SNAP_PRODdg
SNAPSHOT_MODE is online
The database is running in archivelog mode.
ARCHIVELOG_DEST is /prod_db