VERITAS Storage Foundation 4.1 Oracle Administrator's Guide

Chapter 12, Using the VERITAS Storage Foundation for Oracle Graphical User Interface
Prerelease 8 September 2005, 8:55am Managing Storage Checkpoints
297
Note When you select the Read/Write option, the GUI creates an identical Storage Checkpoint
with the same name plus a wr001 suffix, where 001 is a sequential number. The GUI
mounts the new Storage Checkpoint and leaves the original Storage Checkpoint unmounted.
This allows you to roll back to the original Storage Checkpoint.
6. Click Mount to mount the Storage Checkpoint.
7. At the prompt, click Ye s to proceed with mounting the Storage Checkpoint.
When you have finished viewing the details in the Confirmation dialog, click OK to continue.
Unmounting a Storage Checkpoint
▼ To unmount a Storage Checkpoint
1. Click a specific Storage Checkpoint in the object tree. (You may need to expand the tree view
to find the Storage Checkpoint.)
Note If you want to unmount a Storage Checkpoint that was originally mounted with the
Read/Write option, you should unmount the new Storage Checkpoint that was
automatically created by the GUI, which is the Storage Checkpoint that contains the wr001
suffix, where 001 is a sequential number, at the end of the name.
2. Select one of the following methods to unmount the Storage Checkpoint.
◆ From the menu bar, select Storage Checkpoint > Unmount a Storage Checkpoint.
or
◆ Right click the Storage Checkpoint you want to unmount to bring up a pop-up menu. Then
click Unmount Storage Checkpoint.
3. Verify that you are unmounting the correct Storage Checkpoint and click Unmount to
continue. If you selected the wrong Storage Checkpoint, click Cancel. The information on this
screen is read-only.
4. At the prompt, click Ye s to proceed with unmounting the Storage Checkpoint.
5. A confirmation dialog is displayed. Click OK to continue.