VERITAS Storage Foundation 4.1 Intelligent Storage Provisioning Administrator's Guide

181
Command Summary
E
This appendix summarizes the usage and purpose of important commands for the VERITAS
Intelligent Storage Provisioning (ISP) feature of VERITAS Volume Manager (VxVM).
◆ Creating and Administering Storage Pools
◆ Creating and Administering Application Volumes
References are included to longer descriptions in the remainder of this book. For detailed
information about an individual command, refer to the appropriate manual page in the 1M section.
Further examples can be found in “Examples of Using ISP” on page 185.
Creating and Administering Storage Pools
Command Description
vxpool [-g diskgroup] create \
storage_pool [dm=dm1[,dm2...] \
[description="description"] \
\[autogrow=1|2] \
[selfsufficient=1|2|3] \
[rules=rule[,rule ...]
Creates a storage pool. See “Creating a Storage Pool”
on page 36.
vxpool [-g diskgroup] adddisk \
storage_pool dm=dm1[,dm2,...]
Adds one or more disks to a storage pool. See
“Adding Disks to a Storage Pool” on page 39.
vxpool [-g diskgroup] rmdisk \
storage_pool dm=dm1[,dm2,...]
Removes one or more disks from a storage pool. See
“Removing Disks from a Storage Pool” on page 39.
vxpool [-g diskgroup] assoctemplate\
storage_pool template=t1[,t2,...]
Associates one or more templates with a storage pool.
See “Associating Templates with a Storage Pool” on
page 39.
vxpool [-g diskgroup] \
assoctemplateset\
storage_pool \
template_set=ts1[,ts2,...]
Associates one or more template sets with a storage
pool. See “Associating Template Sets with a Storage
Pool” on page 40.