VERITAS Storage Foundation 4.1 Intelligent Storage Provisioning Administrator's Guide

Chapter 8, Using Capabilities, Templates and Rules
Rules
121
this number must be greater than or equal to 1. If no preference order value is specified for a rule, a
value of 1 is assumed. Rules with low preference order values are preferred to be retained over
rules with higher values. Rules with the same preference order are discarded together.
In the following example, the stripe rule can be dropped if there is insufficient storage to fulfill
the storage allocation request:
mirror 2 {
desired 10 confineto "enclosure"
desired 15 stripe 15
}