VERITAS Storage Foundation 4.1 Cross-Platform Data Sharing Administrator's Guide

Displaying Information
32 VERITAS Storage Foundation CDS Administrator’s Guide
logging: type=REGION loglen=528 serial=0/0 mapalign=16 maplen=512
(enabled)
apprecov: seqno=0/0
recovery: mode=default
recov_id=0
device: minor=46000 bdev=212/46000 cdev=212/46000
path=/dev/vx/dsk/dgTestSol/drlvol
perms: user=root group=root mode=0600
guid: {d968de3e-1dd1-11b2-8fc1-080020d223e5}
Listing Offset and Length Information
Use the vxprint command with the -b option to output all offset and length information in units
of 512 bytes. This enables consistent output from different platforms. Without the -b option, this
information is output with a value of sectors that may differ between platforms.
When vxprint -bm is used, the output also contains the b suffix, so that the output can be fed
back to vxmake.
Listing CDS Disk Groups
You can use the following commands to list all disk groups; then look for flag cds in the listing to
locate CDS disk groups.
# vxdg list
# vxprint -Gl
Listing Disks
Use the vxdisk list command with the -b option to output all offset and length information in
units of 512 bytes. This enables consistent output from different platforms. Without the -b option,
this information is output with a value of sectors that may differ between platforms.
When vxdisk -b list is used, the output also contains the b suffix, so that the output can be fed
back to vxmake.
The disk format is put in the TYPE column along with the auto type.