Veritas File System 4.1 Administrator's Guide (HP-UX 11i v3, February 2007)

Kernel Messages

Appendix B204

033 WARNING: msgcnt x: mesg 033: V-2-33: vx_check_badblock - mount_point file

system had an I/O error, setting VX_FULLFSCK

• Description

When the disk driver encounters an I/O error, it sets a flag in the super-block

structure. If the flag is set, the kernel will set the VX_FULLFSCK flag as a

precautionary measure. Since no other error has set the VX_FULLFSCK flag, the

failure probably occurred on a data block.

•Action

Unmount the file system and use fsck to run a full structural check. Check the

console log for I/O errors. If the problem is a disk failure, replace the disk before

the file system is mounted for write access.

034 WARNING: msgcnt x: mesg 034: V-2-34: vx_resetlog - mount_point file system

can’t reset log

• Description

The kernel encountered an error while resetting the log ID on the file system. This

happens only if the super-block update or log write encountered a device failure. The

file system is disabled to preserve its integrity.

•Action

Unmount the file system and use fsck to run a full structural check. Check the

console log for I/O errors. If the problem is a disk failure, replace the disk before

the file system is mounted for write access.

035 WARNING: msgcnt x: mesg 035: V-2-35: vx_inactive - mount_point file system

inactive of locked inode inumber

• Description

VOP_INACTIVE was called for an inode while the inode was being used. This

should never happen, but if it does, the file system is disabled.

•Action

Unmount the file system and use fsck to run a full structural check. Report as a bug

to your customer support organization.

Table B-1 (Continued)

Message

Number

Message and Definition