Veritas File System 4.1 Administrator's Guide (HP-UX 11i v3, February 2007)

Kernel Messages
Kernel Messages
Appendix B190
006, 007 WARNING: msgcnt x: mesg 006: V-2-06: vx_sumupd - mount_point file system
summary update in au aun failed
WARNING: msgcnt x: mesg 007: V-2-07: vx_sumupd - mount_point file system
summary update in inode au iaun failed
• Description
An I/O error occurred while writing the allocation unit or inode allocation unit
bitmap summary to disk. This sets the VX_FULLFSCK flag on the file system. If the
VX_FULLFSCK flag can’t be set, the file system is disabled.
•Action
Check the console log for I/O errors. If the problem was caused by a disk failure,
replace the disk before the file system is mounted for write access, and use fsck to
run a full structural check.
008, 009 WARNING: msgcnt x: mesg 008: V-2-08: vx_direrr - mount_point file system inode
inumber block blkno error errno
WARNING: msgcnt x: mesg 009: V-2-09: vx_direrr - mount_point file system inode
inumber immediate directory error errno
• Description
A directory operation failed in an unexpected manner. The mount point, inode, and
block number identify the failing directory. If the inode is an immediate directory, the
directory entries are stored in the inode, so no block number is reported. If the error
is ENOENT or ENOTDIR, an inconsistency was detected in the directory block.
This inconsistency could be a bad free count, a corrupted hash chain, or any similar
directory structure error. If the error is EIO or ENXIO, an I/O failure occurred while
reading or writing the disk block.
The VX_FULLFSCK flag is set in the super-block so that fsck will do a full
structural check the next time it is run.
•Action
Check the console log for I/O errors. If the problem was caused by a disk failure,
replace the disk before the file system is mounted for write access. Unmount the file
system and use fsck to run a full structural check.
Table B-1 (Continued)
Message
Number
Message and Definition