Veritas 5.0.1 Installation Guide, HP-UX 11i v3, First Edition, November 2009

NOTE: If you are installing VxFS 5.0.1 in a system that includes the HP-UX Data Center
Operating Environment (DC-OE), HP-UX Virtual Server Operating Environment (VSE-OE)
or HP-UX High Availability Operating Environment (HA-OE), you must either mark
OnlineJFS 5.0.1 (B3929GB) in the SD Install window or remove OnlineJFS 5.0 (B3929FB) prior
to installing VxFS 5.0.1.
3. Select Actions, and click Install. Follow the on-screen instructions to complete the installation.
Verifying the Base-VxVM-501 Installation
Verify the Base-VxVM-501 installation on your system by entering the following command:
# swverify Base-VxVM-501
For more information on the supported options, see swverify (1M).
Installing Full VxVM (B9116DB)
The Full VxVM (B9116DB) license enables additional VxVM functionality that are not available
with Base-VxVM-501.
You can install Full VxVM either in the non-interactive mode or in the interactive mode.
Installing Full VxVM in Non-Interactive mode
Enter the swinstall command in the non-interactive mode as follows:
# swinstall -x autoreboot=true -s <depot-path> B9116DB
For more information on the supported options, see swinstall (1M).
Installing Full VxVM in Interactive Mode
To install Full VxVM in the interactive mode, complete the following steps:
1. Enter the swinstall command in the interactive mode, as follows:
# swinstall -s <depot-path>
For more information on supported options, see swinstall (1M).
2. Mark the B9116DB bundle on the SD Install window.
3. Select Actions, and click Install. Follow the on-screen instructions to complete the installation.
NOTE: The B9116DB bundle contains a license for the Full VxVM 5.0.1 functionality.
Verifying the Full VxVM (B9116DB) Installation
Verify the Full VxVM (B9116DB) installation by enter the following command:
# swverify B9116DB
For more information on the supported options, see swverify (1M).
Use the vxlicrep command to check for the installed licenses.
Installing Storage Management For Oracle (SMO)
NOTE: If you install the SMO bundles, you do not need to install the Full VxVM and OnlineJFS
licenses, because these are part of the SMO bundles.
Install the HP SMO Standard (T2789DB) software by entering the following command:
# swinstall -s <depot-path> T2789DB
Installing Storage Management For Oracle (SMO) 33