Veritas 5.0 Installation Guide (September 2006)

Removing VxFS 5.0 and VxVM 5.0
Removing Base-VxFS-50
Chapter 6 47
• To remove the Base-VxFS-50, enter the following:
# swremove -x autoreboot=true Base-VxFS-50
The following output is displayed:
======= 08/10/06 13:21:57 MDT BEGIN swremove SESSION
(non-interactive) (jobid=<server-id>)
* Session started for user "root@<server>".
* Beginning Selection
* Target connection succeeded for "<server>:/".
* Software selections:
Base-VxFS-50,r=B.05.00,a=HP-UX_B.11.23_IA/PA,v=HP
.
.
======= 08/10/06 13:21:57 MDT END swremove SESSION (non-interactive)
(jobid=<server>)
• To verify that the Veritas suite of products are removed from the system, enter the
following:
# swlist -l product \*VRTS\*
The output does not display the VRTSvxfs and VRTSfsman products. This confirms that the
Base-VxFS-50 product is removed.
NOTE After removing Base-VxFS-50 you must remove the EnableVxFS bundle for
NCF products installed on the system.