Veritas 5.0 Installation Guide (September 2006)

Installing VxFS 5.0 and VxVM 5.0
Installing Base-VxFS-50
Chapter 4 23
1. To install Base-VxFS-50, enter the following:
# swinstall -x autoreboot=true -s <depot-path>
Figure 4-1 is displayed. You must mark the Base-VxFS-50 software in the SD Install
window to start the installation.
Figure 4-1 SD Install Window
2. Mark the Base-VxFS-50 software.
3. Select Actions, and click Install. Follow the on-screen instructions to complete the
installation.
The system reboots automatically after the installation is complete. You can monitor the
installation process for warnings and notes. See the log file /var/adm/sw/swagent.log for
information on installation.