Veritas 5.0 Installation Guide, HP-UX 11i v3, First Edition, May 2008

1. Enter the swinstall command in interactive mode as follows
# swintall -x autoreboot=true -s <depot-path>
For more information on the supported options, see swinstall (1M).
2. Mark the Base-VxVM-50 bundle on the SD Install Window.
3. Select Actions, and click Install. Follow the on-screen instructions to complete the installation.
Verifying the Base-VxVM–50 Installation
Verify the Base-VxVM-50 installation on your system by entering the following command:
# swverify Base-VxVM-50
For more information on the supported options, see swverify (1M).
Installing Full VxVM (B9116CB)
The Full VxVM (B9116CB) license enables additional VxVM functionality that are not available
with Base-VxVM-50.
You can install Full VxVM either in the non-interactive mode, or in the interactive mode.
Installing Full VxVM in Non-Interactive mode
Enter the swinstall in non-interactive mode as follows
# swinstall -x autoreboot=true -s <depot-path> B9116CB
For more information on the supported options, see swinstall (1M).
Installing Full VxVM in Interactive Mode
To install Full VxVM in interactive mode, complete the following steps:
1. Enter the swinstall command in interactive mode, as follows:
# swinstall -s <depot-path>
For more information on supported options, see swinstall (1M).
2. Mark the B9116CB bundle on the SD Install window.
3. Select Actions, and click Install. Follow the on-screen instructions to complete the installation.
NOTE: The B9116CB bundle contains a license for the Full VxVM 5.0 functionality.
Verifying the Full VxVM (B9116CB) installation
Verify the Full VxVM (B9116CB) installation by enter the following command:
# swverify B9116CB
For more information on the supported options, see swverify (1M).
Use the vxlicrep command to check for the installed licenses.
Installing Storage Management For Oracle (SMO)
NOTE: If you install the SMO bundles, you do not need to install the Full VxVM and OnlineJFS
licenses, because these are part of the SMO bundles. Ensure that OnlineJFS 4.1 (B3929EA) is
removed before installing the Veritas 5.0 products.
Installing HP SMO Standard (T2789CB )
Install the HP SMO Standard (T2789CB) by entering the following command:
# swinstall -s <depot-path> T2789CB
30 Installing the Veritas 5.0 Products