Veritas 5.0 Installation Guide, HP-UX 11i v3, First Edition, May 2008

NOTE: You cannot install the Base-VxFS and the Base-VxVM 5.0 products on a system where
the Veritas 4.1 versions (for HP-UX 11i v2) of Storage Management for Oracle, HP Serviceguard
Storage Management, or HP Serviceguard Cluster File System product suites is installed. The
AVXFS and AVXVM products (included in VxFS 5.0 and VxVM 5.0, respectively) check the
installed products and cause an installation failure for the Veritas 5.0 products on such systems.
This issue is applicable only for systems that have been upgraded from HP-UX 11i v2 to HP-UX
11i v3.
Tools such as AVXFS, AVXVM, AVXTOOLS, AFULLVXVM, and AONLINEJFS help pull in
dependant products. For example, when you select VxVM 5.0, these tools automatically pull in
VxFS 5.0. These products also address issues of mutual exclusions.
IMPORTANT: OnlineJFS 4.1 (B3929EA) must be removed before installing the Veritas 5.0
products.
Installing Base-VxFS-50
You can install Base-VxFS either in the non-interactive mode, or in the interactive mode.
Installing Base-VxFS-50 in Non-Interactive Mode
Enter the swinstall command in the non-interactive mode, as follows:
# swinstall -x autoreboot=true -s <depot-path> Base-VxFS-50
For more information on the supported options, see swinstall (1M).
Installing Base-VxFS-50 in Interactive Mode
To install Base-VxFS-50 in interactive mode, complete the following steps:
1. Enter the swinstall command in interactive mode, as follows:
# swinstall -x autoreboot=true -s <depot-path>
For more information on the supported options, see swinstall (1M).
2. Mark the Base-VxFS-50 bundle in the SD Install window.
3. Select Actions, and click Install. Follow the on-screen instructions to complete the installation.
The system reboots automatically after the installation is complete. You can monitor the installation
process for warnings and notes. For more information on installation, see the log file
/var/adm/sw/swagent.log.
Verifying Base-VxFS-50 Installation
Verify the Base-VxFS-50 installation on your system by entering the following command:
# swverify Base-VxFS-50
For more information on the supported options, see swverify (1M).
Installing HP OnlineJFS (B3929FB)
The HP OnlineJFS (B3929FB) license enables additional VxFS functionality not available with
Base-VxFS-5.0.
You can install HP OnlineJFS (B3929FB) either in the non-interactive, or in the interactive mode.
Installing HP OnlineJFS (B3929FB) in Non-Interactive Mode
Enter swinstall command in non-interactive mode, as follows:
# swinstall -s <depot-path> B3929FB
28 Installing the Veritas 5.0 Products