Veritas 4.1 Installation Guide (HP-UX 11i v3, February 2007)

2 System Requirement
This chapter discusses the various hardware and software requirements for the Veritas 4.1 suite
of products. The following disk arrays, JBODs, Servers and 3rd Party Array products are supported
by the Veritas 4.1 suite of products.
Hardware Configuration Supported
For information on supported disk arrays, JBODs, third party arrays products and other supported
hardware VxFS 4.1 and VxVM 4.1 on HP-UX 11i Version 3, see Hardware Support Matrix For
VxFS 4.1 and VxVM 4.1 on HP-UX 11i Version 3 available at http://docs.hp.com.
Software Dependency
VxFS 4.1 works with both HP LVM and VxVM 4.1 on HP-UX 11i Version 3.
Ignite-UX version C.6.9 or later is required for use with Veritas 4.1 products. See Ignite-UX
Release Notes for more information.
If VxFS 5.0 has been used to create file systems with disk layout version 7, those disks will
not be readable by the VxFS 4.1 that ships with 11i v3. You must first copy your data off the
DLV 7 file systems and onto file systems created using disk layout version 5 or 6 before
upgrading to HP-UX 11i v3.
Similarly VxVM 4.1 can not read the latest disk group version 140 supported with Veritas
5.0 products.
OS Version
HP-UX 11i Version 3
Patch Requirement
No patches are required for the Veritas 4.1 Products to work on HP-UX 11i Version 3.
Software Depot Content
The following tables list the composition of the Base-VXFS 4.1 and Base-VXVM 4.1 bundles.
Table 2-1 Base-VXFS 4.1 Bundle Components
DescriptionBundle
VERITAS File System
VRTSvxfs
VERITAS License Utilities
VRTSvlic
VERITAS File System Manuals
VRTSfsman
Table 2-2 Base-VXVM 4.1 Bundle Components
DescriptionBundle
Base VERITAS Volume Manager 4.1 for HP-UX
VRTSvxvm
VxMS Application Deployment Package
VRTSvxmsa
VERITAS Volume Manager: VERITAS Intelligent Storage Provisioning
VRTSalloc
VERITAS Device Discovery Layer Services Provider
VRTSddlpr
VERITAS Task Exec Provider
VRTStep
VERITAS Action Provider
VRTSap
Hardware Configuration Supported 21