Installation of VxFS and VxVM 4.1 on HP-UX 11i v3 September 2009 Operating Environment Update Release (September 2009)

Base-VXFS Base VxFS File System 4.1 Bundle for HP-UX
Base-VXVM Base VERITAS Volume Manager Bundle 4.1 for HP-UX
5. Use the Ignite-UX interface to deselect the VxVM 5.0 software if it is
selected. On the Software tab, deselect the following:
B3929FB OnlineJFS for Veritas File System 5.0 Bundle
Base-VxFS-50 Veritas File System Bundle 5.0 for HP-UX
Base-VxVM-50 Base VERITAS Volume Manager Bundle 5.0 for HP-UX
Base-VxTools-50 VERITAS Infrastructure Bundle 5.0 for HP-UX
6. Make any other configuration choices needed using the Ignite-UX interface,
and then select Go! to cold-install the client.
Confirming the Client
After the system boots, confirm the client has the intended software and
configuration. To confirm the software and the configuration, complete the
following steps:
1. Confirm the correct hostname. The output of the following command would
show the hostname:
# hostname
2. Confirm the correct OE version. The output of the following command would
display the OE version currently installed on the system:
# swlist | grep HPUX
3. Confirm installation of Base VERITAS Volume Manager Bundle 4.1 for HP-
UX 11i v3. The following command would show the VxVM 4.1 products
installed on the system:
# swlist Base-VXVM
4. Confirm installation of Veritas File System Bundle 4.1 for HP-UX 11i v3. The
following command would show the VxFS 4.1 products installed on the
system:
# swlist Base-VXFS