Installation of non-default VxFS and VxVM software version on HP-UX 11i v3 March 2012 Operating Environment Update Release (January 2013)

NOTE: HP does not support mixed versions of VxFS and VxVM.

Installing or updating to HP-UX 11i v3 March

2012 OEUR from a customized depot

This section describes how to install or update to HP-UX 11i v3 March 2012 OEUR with

VxFS and VxVM version 4.1, 5.0, or 5.1 SP1 from a customized depot. You can obtain

the VxFS and VxVM version of 4.1, 5.0, or 5.1 SP1 bundles from the Independent media

set.

NOTE: All Disk Group versions supported by VxVM version 4.1, VxVM 5.0, and VxVM

version 5.0.1 are supported by VxVM version 5.1 SP1. All Disk layouts supported by

VxFS version 4.1, 5.0, and 5.0.1 are supported by VxFS 5.1SP1.

To install or update a VxFS and VxVM version 4.1, 5.0, or 5.1 SP1 based system:

1. Copy the March 2012 11i v3 OEUR or later Operating Environment (OE) into a SD

depot.

2. Delete VxFS and VxVM version 5.0.1 from the depot (created in step 1):

# swremove –d B3929GB Base-VxFS-501 Base-VxTools-501

Base-VxVM-501 @ <destination depot>

3. Copy the respective version of VxFS and VxVM bundles into the depot:

CASE A: For VxFS/VxVM 4.1

# swcopy –s <depot location of VxFS and VxVM 4.1>

B3929EA Base-VXFS Base-VXVM @ <destination depot>

CASE B: For VxFS/VxVM 5.0

# swcopy –s <depot location of VxFS and VxVM 5.0>

B3929FB Base-VXFS-50 Base-VxTools-50 Base-VxVM-50 @

CASE C: For VxFS/VxVM 5.1 SP1

# swcopy –s <depot location of VxFS and VxVM 5.1 SP1>

B3929HB Base-VXFS-51 Base-VxTools-51 Base-VxVM-51 @

NOTE:

Copy only one version of VxFS or VxVM into the SD depot. Do not copy the

multiple or mixed versions of VxFS or VxVM into the depot. This can lead to

unsupported configurations during Ignition.