HP JFS 3.3 and HP OnLineJFS 3.3 VERITAS File System 3.3 System Administrator's Guide

154 AppendixA
Kernel Messages
Kernel Messages
• Explanation
An HSM (Hierarchical Storage Management) agent responded to a
DMAPI mount event and returned a message in buffer .
• Action
Consult the HSM product documentation for the appropriate
response to the message.
Message 067 WARNING: msgcnt x : vxfs: mesg 067: mount of device_path
requires HSM agent
• Explanation
The file system mount failed because the file system was marked as
being under the management of an HSM agent, and no HSM agent
was found during the mount.
• Action
Restart the HSM agent and try to mount the file system again.
Message 068 WARNING: msgcnt x : vxfs: mesg 068: ncsize parameter is
greater than 80% of the vxfs_ninode parameter;
increasing the value of vxfs:vxfs_ninode
• Explanation
The value auto-tuned for the vx_ninode parameter is less than 125%
of the ncsize parameter. This message occurs only if one of the
system tuneable parameters—ncsize, vx_ninode, maxusers, or
max_nprocs—is set manually in the file /etc/system.
• Action
To prevent this message from occurring, set vx_ninode to at least
125% of the value of ncsize. The best way to do this is to adjust
ncsize down, rather than adjusting vx_ninode up. For more
information on performance and tuning, see Chapter 5 , “Performance
and Tuning”.
NOTE The tuneable parameter vx_ninode is used to set the value of
vxfs_ninode.
Message 069 WARNING: msgcnt x : vxfs: mesg 069: memory usage