HP X.25 Release Notes (5900-1522, December 2011)

Table 1 Defect Fixes (continued)
ProblemSR Number
The X.25 LLC2 (XOL) interface doesn't recover from a LAN cable disconnection, if a user
application sends a connect request while the LAN cable is disconnected.
QXCR1001070243
On any system using LAN interface lan257 and higher, when the x25init command is
executed to configure X.25 over LLC2 (XOL), the following warning message may be displayed:
QXCR1001103226
# x25init -c x25init_llc2_lan1 -L llc2_conf_lan1
[x25init] lan number 9000 is too big.
CAUSE : The specified parameter has an incorrect value
ACTION : Check the parameter value in configuration
[x25init] lan number 9001 is too big.
CAUSE : The specified parameter has an incorrect value
ACTION : Check the parameter value in configuration
When the x25init command is executed to start X.25 using XOL and X.25/HA, the following
error message is displayed:
QXCR1001120664
/usr/sbin/x25HAmonitor: illegal option -- a
On a HP-UX 11i v3 IA system, when the padem command is executed without X.121 address,
the CTRL+P character is ignored.
QXCR1001119011
Software availability in native languages
This version of X.25 is available only in English.
Software availability in native languages 7