Using HP-UX Internet Services (February 2007)
A list of all the telnet commands are displayed.
NOTE: If you are connected to a remote host and wish to redisplay its prompt,
press Return twice.
Getting Information about a Specific telnet Command
To obtain information about a specific telnet command, perform the following steps:
1. If you are not at the telnet> prompt, enter the telnet escape character (usually
CTRL-]) to display the prompt.
2. At the telnet> prompt, enter the following command:
? telnet_command
For example, if you type the following command at the telnet prompt:
? open, telnet
telnet displays the following information about the open command:
connect to a site
NOTE: If you were connected to a remote host and wish to redisplay its prompt,
press Return twice.
16 Logging into a Host Using telnet