Sendmail 8.13.3 release notes for HP-UX 11i v1, HP-UX 11i v2 and HP-UX 11i v3

NOTE: The Sendmail 8.13.3 Web upgrade for the HP-UX 11i v1, HP-UX 11i v2, and
HP-UX 11i v3 operating systems, delivers a new copy of the Sendmail configuration
file as /usr/newconfig/etc/mail/sendmail.cf. You must merge your site-specific
customizations with this new configuration file sendmail.cf. You must also run the
following commands at the HP-UX prompt to stop and start the Sendmail daemon,
respectively, after modifying the sendmail.cf file:
# /sbin/init.d/sendmail stop
# /sbin/init.d/sendmail start
MSP is not started by default because the /etc/mail/submit.cf configuration file
is not available on the system. Therefore, the following error message is displayed
when you start the Sendmail daemon:
Starting sm-client [FAILED]
Verifying the Sendmail 8.13.3 Installation
To verify whether the Sendmail 8.13.3 depot is installed successfully on your system,
run the following command at the HP-UX prompt:
# swlist -l product Sendmail-Upgrade
The following lists the output that is displayed when you run the swlist -l product
<depot-name> command on the HP-UX 11i v1, HP-UX 11i v2, and HP-UX 11i v3
operating systems:
• On the HP-UX 11i v1 Operating System
If Sendmail 8.13.3 is installed successfully on the HP-UX 11i v1 operating system,
the following message is displayed:
SMAIL-IDENT B.11.11.02.008 identd(1M): User Identification protocol
SMAIL-UPGRADE B.11.11.02.008 sendmail(1M) 813 special release upgrade
This output indicates that both the Sendmail 8.13.3 and Identd product bundles
are installed in the system.
If you install only Sendmail 8.13.3, the following output is displayed:
Sendmail-Upgrade.SMAIL-UPGRADE B.11.11.02.008 sendmail(1M) 813 special release upgrade
If you install only Identd, the following output is displayed:
Sendmail-Upgrade.SMAIL-IDENT B.11.11.02.008 identd(1M): User Identification protocol
• On the HP-UX 11i v2 Operating System
If Sendmail 8.13.3 is installed successfully on the HP-UX 11i v2 operating system,
the following message is displayed:
SMAIL-IDENT B.11.23.1.007 identd(1m) User Identification protocol
SMAIL-UPGRADE B.11.23.1.007 sendmail(1m) 813 special release upgrade
This output indicates that both the Sendmail 8.13.3 and Identd product bundles
are installed in the system.
12 Sendmail 8.13.3 Release Notes