OSI Troubleshooting Guide, May 1997

36 Chapter 1
Interoperability Testing
Running LAN Tests
Running LAN Tests
1. From root, type /opt/ots/bin/osidiag and select “LAN Tests.”
2. Create a result file.
3. Select “Test Frames.”
4. Enter the interface name to issue the test from (lan0, lan1, etc.). The
default from the ots_subnets file can be used unless you have
multiple I/O Cards.
5. Enter the value previously retrieved for the remote MAC address in
hexadecimal (always 6 bytes - 12 hex digits). Do not include the
leading “0x” if present.
6. If the test status field says “PASSED,” proceed to “Testing Transport
Interoperability” on page 30.
If the test status field says “FAILED,” see “Interpreting LAN Errors”
on page 37.