ONCplus Release Notes (762806-001, March 2014)

Verifying ONCplus B.11.31.17 installation
To verify the ONCplus installation:
1. Execute the following command to verify the software installation:
swverify ONCplus
If ONCplus B.11.31.17 is successfully installed, the following message is displayed:
Verification succeeded
2. To check which version of ONCplus is installed on your system, execute the following command:
swlist | grep ONCplus
The output will be similar to the following:
ONCplus B.11.31.17 ONC+ 2.3
Reverting to a earlier version of ONCplus
You cannot remove the current version of ONCplus with the swremove command. However, you
can revert to a earlier version of ONCplus. The following section describes how to revert to a
earlier version of ONCplus.
1. Download the desired ONCplus depot from the ONCplus web page http://software.hp.com,
or from the media you originally used to install your system.
2. Login as root.
3. Copy the downloaded ONCplus version of the depot (B.11.31_LR, B.11.31.01, B.11.31.02,
B.11.31.03, B.11.31.04, B.11.31.05, B.11.31.06, B.11.31.06.01, B.11.31.07,
B.11.31.07.01, B.11.31.08, B.11.31.09, B.11.31.09.01, B.11.31.09.02, B.11.31.10,
B.11.31.11, B.11.31.12, B.11.31.13, B.11.31.14, B.11.31.15, B.11.31.16) to /tmp/
ONCplus_B.11.31.depot.
18 ONCplus B.11.31.17