ONCplus Release Notes (762806-001, March 2014)

Installing ONCplus B.11.31.17
IMPORTANT: Back up your system before installing the product.
To install ONCplus B.11.31.17 on your system:
1. Login as root.
2. To check which version of ONCplus is currently installed on your system, execute the following
command:
swlist | grep ONCplus
The output will be similar to one of the following twenty one lines:
ONCplus B.11.31.16 ONC+ 2.3
ONCplus B.11.31.15 ONC+ 2.3
ONCplus B.11.31.14 ONC+ 2.3
ONCplus B.11.31.13 ONC+ 2.3
ONCplus B.11.31.12 ONC+ 2.3
ONCplus B.11.31.11 ONC+ 2.3
ONCplus B.11.31.10 ONC+ 2.3
ONCplus B.11.31.09.02 ONC+ 2.3
ONCplus B.11.31.09.01 ONC+ 2.3
ONCplus B.11.31.09 ONC+ 2.3
ONCplus B.11.31.08 ONC+ 2.3
ONCplus B.11.31.07.01 ONC+ 2.3
ONCplus B.11.31.07 ONC+ 2.3
ONCplus B.11.31.06.01 ONC+ 2.3
ONCplus B.11.31.06 ONC+ 2.3
ONCplus B.11.31.05 ONC+ 2.3
ONCplus B.11.31.04 ONC+ 2.3
ONCplus B.11.31.03 ONC+ 2.3
ONCplus B.11.31.02 ONC+ 2.3
ONCplus B.11.31.01 ONC+ 2.3
ONCplus B.11.31 ONC+ 2.3
3. After you download the ONCplus_B.11.31.17.depot file, move it to the /tmp directory:
/tmp/ONCplus_B.11.31.17.depot
4. Verify that the file has downloaded correctly using the swlist command as follows:
swlist -d @ /tmp/ONCplus_B.11.31.17.depot
If ONCplus is downloaded correctly, the output will include:
# # Bundle(s): # ONCplus
B.11.31.17 ONC+ 2.3 # # Product(s) not contained in
a Bundle: # PHCO_38048 1.0 libc cumulative
patch
NOTE: You must specify the full path name of the source depot when you use swlist and
swinstall commands.
5. Execute the following command to install the product on a stand-alone system:
swinstall -x autoreboot=true -s \ /tmp/ONCplus_B.11.31.17.depot
ONCplus
NOTE: ONCplus includes kernel filesets. As a result, installing the product using the
swinstall command will require the system to be restarted after the installation is complete.
Installation Information 17