ONCplus B.11.31.18 Release Notes (762806-002, June 2014)

Table 1 ONCplus enhancements and software defect fixes (continued)
ONCplus VersionDescriptionCR ID
B.11.31.13
The statd and automountd daemons incorrectly accept requests
sent from a non-loopback address.QXCR1001052992
B.11.31.13The gssd daemon may run into a loop under certain conditions.QXCR1001090660
B.11.31.13
Attempting a forced unmount may result in NFS client system to
hang when many write requests are in progress on the system.QXCR1001092363
B.11.31.13
The NFS client may panic when the nfs_acl_dup_res_impl function
is executed.QXCR1001098196
B.11.31.13
Attempting an “autofs –unmount” may slow down the NFS client
system.QXCR1001099929
B.11.31.13Adding a host to a netgroup may not work.QXCR1001099945
B.11.31.13
The pcnfsd daemon may hang when multiple Auth requests are
sent to the wlogin function.QXCR1001105312
B.11.31.13
When the NFS v3 and v4 open/write 32bit API is executed
without the O_LARGEFILE parameter, the file size can exceed 2
GB.QXCR1001106195
B.11.31.13
The nfsmapid daemon may dump core when the DNS server is a
windows server.QXCR1001114093
B.11.31.13
On an NFS protocol v4 system, the default ACLs for the set and
get directories may fail with the error “acl failed for file "x",Invalid
argument".QXCR1001115636
B.11.31.13
On an NFS client system, when a single find command is used to
find and remove a 0 MB file, the system may panic and display
the message "panic: b_spinner_cpsema bad?”.QXCR1001124632
B.11.31.13
The default parameter for the clnt_clts_max_endpoints function
has been modified to support the reserving of ports for application
usage.QXCR1001127328
B.11.31.13
The locking mechanism for the e_cnt member of the endpnt_type
function has been modified to restrict the maximum number of
endpoints.QXCR1001127336
B.11.31.13
The ‘mount -o vers=4,proto=tcp...’ command may fail when a
firewall is present.QXCR1001131929
B.11.31.13
A high priority thread may get into a loop by waiting for a lock
that is held by a lower priority thread, which may result in a
non-pingable hang.QXCR1001044409
B.11.31.13
NFS client may hang in a loopback environment if UFC filecache
is set to very low (say 1%).QXCR1001059162
B.11.31.11
Executing the open() system call thread over NFSv3 mount may
result in system hang.QXCR1001010420
B.11.31.11
On an HP-UX 11i v3 NFS client system, NFSv3 server-crash
recovery does not work.QXCR1001059767
B.11.31.11
The ls -l command may hang on an NFS-mounted filesystem
running ONCplus B.11.31.09.QXCR1001052004
B.11.31.11
Under certain circumstances, the rpc.lockd daemon mistakenly
closes the “listen” fd on the T_DISCONNECT event.QXCR1001080581
B.11.31.11
NFSv4 server sends the same write verifier across reboots, resulting
in data corruption.QXCR1001090034
B.11.31.11NFS/VM ASSERT panic occurs during debug kernel testing.QXCR1001051156
12 ONCplus B.11.31.18