ONCplus B.11.31.
© Copyright 2009, 2012 Hewlett-Packard Development Company, L.P Legal Notices Confidential computer software. Valid license required from Hewlett-Packard for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor’s standard commercial license. The information contained herein is subject to change without notice.
Contents 1 ONCplus Overview....................................................................................4 Overview................................................................................................................................4 Availability of ONCplus as an ISU..............................................................................................4 NIS+ Obsolescence Notice........................................................................................................
1 ONCplus Overview This chapter addresses the following topics: • “Overview” (page 4) • “Availability of ONCplus as an ISU” (page 4) • “NIS+ Obsolescence Notice” (page 5) • “NIS Protocol Version 1 Obsolescence Notice” (page 5) • “Related Information” (page 5) Overview Open Network Computing (ONC) comprises core services that enable administrators to implement distributed applications in a heterogeneous distributed computing environment. It also includes tools to administer clients and servers.
NIS+ Obsolescence Notice Network Information Service Plus (NIS+) is a distributed database system that enables the maintenance of commonly used configuration information on a master server and propagates the information to all the hosts in the network. Starting with HP-UX 11i v3, NIS+ is no longer supported. Hewlett-Packard recommends that users migrate to LDAP. NOTE: For information on how to migrate from NIS+ to LDAP, see the NIS+ to LDAP Migration Guide.
2 ONCplus B.11.31.14 This chapter contains the most recent product information pertaining to the Open Networking Computing (ONC) product, version B.11.31.14, which is supported on the HP-UX 11i v3 operating system. This chapter addresses the following topics: • “Announcement” (page 6) • “What's New in ONCplus B.11.31.14” (page 6) • “Enhancements and Fixes in ONCplus to date” (page 6) • “Installation Information ” (page 12) Announcement This version of ONCplus (B.11.31.
Table 1 ONCplus Enhancements and Software Defect Fixes (continued) CR ID Description ONCplus Version QXCR1001114093 The nfsmapid daemon may dump core, when the DNS server is a windows server. B.11.31.13 QXCR1001115636 On a NFS protocol v4 system, the default ACLs for the set and get directories may fail with the error “acl failed for file "x",Invalid argument". B.11.31.
Table 1 ONCplus Enhancements and Software Defect Fixes (continued) CR ID Description ONCplus Version QXCR1001043859 The rpcinfo -s command sometimes dumps core. B.11.31.10 QXCR1001039782 The Thundering Herd issue exists on HP-UX 11i v3. B.11.31.10 QXCR1001007763 HP-UX 11i v3 NFS server panics in nfs4deleg_support() mode. B.11.31.10 QXCR1001051998 ONCplus B.11.31.09 - dd command over NFS may not be killable. B.11.31.10 QXCR1001042152 NFS subsystem-hang is introduced by ONCplus versions B.11.31.
Table 1 ONCplus Enhancements and Software Defect Fixes (continued) CR ID Description ONCplus Version QXCR1000965590 NIS 2.3 gets compilation error for yp_prot.h. B.11.31.09 QXCR1000967201 NFS does not call allocb() appropriately which could result in a system hang. B.11.31.09 QXCR1000967219 The rpc.pcnfsd daemon may exit without core dump. B.11.31.09 Setting the "nfs4_max_threads" tunable to 257 or above causes system panic. QXCR1000973889 (STP) B.11.31.
Table 1 ONCplus Enhancements and Software Defect Fixes (continued) CR ID Description ONCplus Version *QXCR1000898226 NFSv3 does not fully support large files B.11.31.07 Support for chained mblks to avoid any data corruption during a read QXCR1000893901 operation. B.11.31.07 On NFS mounts with tcp and noac options, setting nfs3_bsize tunable to a value greater than or equal to 64KB, results in file sizes more than its actual QXCR1000857730 size at the time of their creation or modification. B.11.31.
Table 1 ONCplus Enhancements and Software Defect Fixes (continued) CR ID Description ONCplus Version QXCR1000745905 An NFS close() returns the error message "close: operation would block". B.11.31.03 QXCR1000743541 An NFS file is corrupted under heavy system load. B.11.31.03 QXCR1000759153 AutoFS fails to mount with NFSv4 after an update from HP-UX 11i v2 to HP-UX B.11.31.03 11i v3. QXCR1000769108 A system runs out of memory and hangs when NFS and NFS file locking are heavily used. B.11.31.
Table 1 ONCplus Enhancements and Software Defect Fixes (continued) CR ID Description ONCplus Version QXCR1000582821 The output for the nfsstat command used with -m option is incorrect when B.11.31.01 using replicated servers or long hostnames. QXCR1000583678 CacheFS panics when issuing simultaneous mount requests with a full front file system. B.11.31.01 QXCR1000585325 The nfstat.h header file incorrectly defines MAX_RFS4_PROC_NO as 40. B.11.31.
ONCplus ONCplus ONCplus ONCplus ONCplus ONCplus ONCplus ONCplus ONCplus ONCplus ONCplus ONCplus ONCplus ONCplus 3. B.11.31.09.02 B.11.31.09.01 B.11.31.09 B.11.31.08 B.11.31.07.01 B.11.31.07 B.11.31.06.01 B.11.31.06 B.11.31.05 B.11.31.04 B.11.31.03 B.11.31.02 B.11.31.01 B.11.31 ONC+ 2.3 ONC+ 2.3 ONC+ 2.3 ONC+ 2.3 ONC+ 2.3 ONC+ 2.3 ONC+ 2.3 ONC+ 2.3 ONC+ 2.3 ONC+ 2.3 ONC+ 2.3 ONC+ 2.3 ONC+ 2.3 ONC+ 2.3 After you download the ONCplus_B.11.31.14.depot file, move it to the /tmp directory: /tmp/ONCplus_B.11.
Reverting to a Earlier Version of ONCplus You cannot remove the current version of ONCplus with the swremove command. However, you can revert to a earlier version of ONCplus. The following section describes how to revert to a earlier version of ONCplus. 14 ONCplus B.11.31.
WARNING! 1. Problem There is a possibility for an NFS client to experience a system hang if you revert to one of the below ONCplus versions: • ONCplus B.11.31.09 • ONCplus B.11.31.09.01 • ONCplus B.11.31.09.02 Cause The NFS client could hang under below conditions/configurations: • Severe file cache memory pressure due to low file cache configuration. For example, filecache_min = filecache_max =1% • When the nfs3_max_threads tunable is set to “0”.
3. 4. 5. On an HP-UX server with ONCplus B.11.31.07.01 installed, NFSv3 does not fully support large files. Directory related operations on an NFS client with ONCplus B.11.31.06 or B.11.31.07 versions installed along with mounted file systems with read/write permissions that are greater than 8192 bytes in size may result in system panic or data corruption. If your system has ONCplus B.11.31.06 or B.11.31.07 version installed, HP recommends that you install ONCplus B.11.31.07.01 version.
3. 4. Copy the downloaded ONCplus version of the depot (B.11.31_LR, B.11.31.01, B.11.31.02, B.11.31.03, B.11.31.04, B.11.31.05, B.11.31.06, B.11.31.07, B.11.31.07.01, B.11.31.08, B.11.31.09, B.11.31.09.01, B.11.31.09.02, B.11.31.10, B.11.31.11, B.11.31.12) to /tmp/ONCplus_B.11.31.depot. To revert to the previous version of ONCplus enter the following command: swinstall -x allow_downdate=true -x autoreboot=true \ -s /tmp/ONCplus_B.11.31.depot ONCplus NOTE: ONCplus contains kernel filesets.
3 Known Problems and Workarounds This section lists known problems, probable causes, and appropriate workarounds. Problem On an HP-UX 11i v3 system running ONCplus B.11.31.13, when the “nfs_enable_ufc_threshold” tunable is enabled, the following issues may occur: • The write operation may be interrupted when very large files are copied over NFS. • System crash may occur under heavy load conditions. Solution This problem has been fixed in ONCplus B.11.31.14. Workaround For ONCplus B.11.31.
For more information about the new tunables, see the Managing NFS and KRPC Kernel Configurations in HP-UX 11i v3 whitepaper. NOTE: This solution is implemented for NFS v3 only as of now. All NFS v3 filesystems have to be unmounted if there is any change in these tunables or UFC filecache_max. Workaround For ONCplus B.11.31.13 and earlier versions, the workaround is to use the "forcedirectio" option for the NFS mount. Problem When ONCplus B.11.31.
On this page, select HP-UX Containers (SRP) Software.
4 Features Introduced in previous versions of ONCplus This chapter describes the features introduced and/or defect fixes in all the previous versions of ONCplus B.11.31. • “Features Introduced in ONCplus B.11.31.13” (page 21) • “Features Introduced in ONCplus B.11.31.12” (page 21) • “Features Introduced in ONCplus B.11.31.11” (page 22) • “Features Introduced in ONCplus B.11.31.10” (page 22) • “Features Introduced in ONCplus B.11.31.09.02” (page 22) • “Features Introduced in ONCplus B.11.31.09.
• Network Lock manager (NLM) and Network Status Monitor (rpc.lockd and rpc.statd) client-side services. • Generating NFS client mount point statistics using the nfsstat command. • NIS server and client services. When ONCplus is operating in the SRP environment, the following features/services are not supported: • NFS server services and the rpc.pcnfsd daemon • CacheFS service • NFSv4 server's delegation stackable FS module For information on HP-UX SRP A.03.
Features Introduced in ONCplus B.11.31.09 ONCplus B.11.31.09 includes both defect fixes and new features. All features introduced in previous ONCplus versions are supported in ONCplus B.11.31.09. The following feature was introduced in ONCplus B.11.31.09: New NFS Feature in ONCplus B.11.31.09 NFS introduces the following feature: Parallel mount feature for performance improvement. Prior to ONCplus B.11.31.
This feature can be enabled using the following three tunables. ◦ nfs3_enable_async_directio_read ◦ nfs3_enable_async_directio_write ◦ nfs3_max_async_directio_requests For more information on these tunables, see the Managing NFS and KRPC Kernel Configurations in HP-UX 11i v3 whitepaper. To locate this document, go to the HP-UX Networking docs page at: http://www.hp.com/go/hpux-networking-docs. On this page, select HP-UX 11i v3 Networking Software. NOTE: This feature is disabled by default.
New NIS Features in ONCplus B.11.31.04 NIS introduces the following features: • IPv6 support for RPC commands and daemons Phase I ONCplus B.11.31.04 delivers IPv6 support for rpc.rexd, rpc.rwalld, rpc.rusersd, rusers, and rwall commands and daemons. Other RPC commands and daemons (rpc.statd and rpc.rquotad) will support IPv6 in a future release of ONCplus.
New NFS Features in ONCplus B.11.31.03 NFS introduces the following features for NFSv4: • File Delegation with Local Access NFSv4 clients support delegation on HP-UX 11i v3. However, until ONCplus B.11.31.03, NFSv4 servers supported delegation with the caveat that no local file access will occur on any delegated file. For example, if the server grants a delegation to the file “/a/b/foo” then any local users on the server need to avoid accessing file “foo” while the delegation is in effect.
by the cache directory (also known as the working set size). This command uses the logfile created by the cachefslog command to display the information. The cachefswssize command, used with the -a option, displays the information in ASCII format. New NIS Features in ONCplus B.11.31.02 NIS introduces the following features: • Support for IPv6 Protocol The NIS clients and servers are now IPv6 enabled.
the server. When another client requests access to the same file, the server revokes the delegation from the first client and grants it to the second client. NOTE: Delegations are disabled by default. If delegations are enabled, they are only supported by applications that access the delegated files remotely via NFS clients. Allowing local access and enabling delegation on a file can corrupt the file.
NOTE: Client failover support is limited to read-only mounts or static filesystems that are not modified often. • Enhanced NFS logging NFS server logging enables an NFS server to provide a record of file operations that are performed on its filesystems. New AutoFS Features in ONCplus B.11.31_LR AutoFS supports the following features: • On-Demand Mounting of Hierarchical Filesystems In earlier versions, AutoFS mounted an entire set of filesystems if they were hierarchically related.
• ◦ HFS ◦ VxFS ◦ CIFS ◦ AutoFS Secure NFS Support If the NFS client supports mounting of secure directories, AutoFS supports Secure NFS filesystems. • IPv6 Support AutoFS provides support for mounting filesystems over IPv6 transports. New CacheFS Features in ONCplus B.11.31_LR CacheFS supports the following features: • Complete Binary Caching CacheFS is commonly used to manage application binaries. This feature enables you to cache a complete binary file in the local cache.
• Switching Mount Options You can switch between mount options without deleting or rebuilding the cache. For instance, you can switch from default to non-shared, or from noconst to demandconst mount options without recreating the cache. • Support for Large Files and Large Filesystems CacheFS supports the maximum file and filesystem sizes supported by both the underlying front filesystem in which the cache resides and the back filesystem. CacheFS data structures are 64-bit compliant.
