ONCplus B.11.31.11 Release Notes (5900-1557, February 2011)

Installing ONCplus B.11.31.11
IMPORTANT: Back up your system before installing the product.
To install ONCplus B.11.31.11 on your system:
1. Login as root.
2. To check which version of ONCplus is currently installed on your system, run the following
command:
swlist | grep ONCplus
The output will be similar to one of the following thirteen lines:
ONCplus B.11.31.10 ONC+ 2.3
ONCplus B.11.31.09.02 ONC+ 2.3
ONCplus B.11.31.09.01 ONC+ 2.3
ONCplus B.11.31.09 ONC+ 2.3
ONCplus B.11.31.08 ONC+ 2.3
ONCplus B.11.31.07.01 ONC+ 2.3
ONCplus B.11.31.07 ONC+ 2.3
ONCplus B.11.31.06.01 ONC+ 2.3
ONCplus B.11.31.06 ONC+ 2.3
ONCplus B.11.31.05 ONC+ 2.3
ONCplus B.11.31.04 ONC+ 2.3
ONCplus B.11.31.03 ONC+ 2.3
ONCplus B.11.31.02 ONC+ 2.3
ONCplus B.11.31.01 ONC+ 2.3
ONCplus B.11.31 ONC+ 2.3
3. After you download the ONCplus_B.11.31.11.depot file, move it to the /tmp directory:
/tmp/ONCplus_B.11.31.11.depot
4. Verify that the file has downloaded correctly using the swlist command as follows:
swlist -d @ /tmp/ONCplus_B.11.31.11.depot
If ONCplus is downloaded correctly, the output will include:
#
# Bundle(s):
#
ONCplus B.11.31.11 ONC+ 2.3
#
# Product(s) not contained in a Bundle:
#
PHCO_38048 1.0 libc cumulative patch
12 ONCplus B.11.31.11