ONCplus B.11.31.09.02 Release Notes (July 2010)

ONCplus B.11.31.06 ONC+ 2.3
ONCplus B.11.31.05 ONC+ 2.3
ONCplus B.11.31.04 ONC+ 2.3
ONCplus B.11.31.03 ONC+ 2.3
ONCplus B.11.31.02 ONC+ 2.3
ONCplus B.11.31.01 ONC+ 2.3
ONCplus B.11.31 ONC+ 2.3
3. After you download the ONCplus_B.11.31.09.02.depot file, move it to the /tmp
directory:
/tmp/ONCplus_B.11.31.09.02.depot
4. Verify that the file has downloaded correctly using the swlist command as follows:
swlist -d @ /tmp/ONCplus_B.11.31.09.02.depot
If ONCplus is downloaded correctly, the output will include:
#
# Bundle(s):
#
ONCplus B.11.31.09.02 ONC+ 2.3
#
# Product(s) not contained in a Bundle:
#
PHCO_38048 1.0 libc cumulative patch
NOTE: You must specify the full path name of the source depot when you use swlist
and swinstall commands.
5. Run the following command to install the product on a stand-alone system:
swinstall -x autoreboot=true -s \
/tmp/ONCplus_B.11.31.09.02.depot ONCplus
NOTE: ONCplus includes kernel filesets. As a result, installing the product using the
swinstall command will require the system to be restarted after the installation is complete.
Verifying ONCplus B.11.31.09.02 Installation
To verify the ONCplus installation:
1. Run the following command to verify the software installation:
swverify ONCplus
If ONCplus B.11.31.09.02 is successfully installed, the following message is displayed:
Verification succeeded
2. To check which version of ONCplus is installed on your system, issue the following
command:
swlist | grep ONCplus
The output will be similar to the following:
ONCplus B.11.31.09.02 ONC+ 2.3
16 ONCplus B.11.31.09.02