NFS Services Administrator's Guide

Configuring and Administering NFS Services
Configuring and Administering NFS Clients
Chapter 2 85
mount
The directories that you have unmounted must not be present in the
list displayed.
6. If you do not want the directory to be automatically mounted when
the system is rebooted, remove the directory entry from the
/etc/fstab file.
Disabling NFS Client Capability
To disable the NFS client, follow these steps:
1. On the NFS client, enter the following command to get a list of all
the mounted NFS filesystems on the client
/usr/sbin/nfsstat -m
2. For every NFS mounted directory listed by the nfsstat command,
enter the following command to determine whether the directory is
currently in use:
/usr/sbin/fuser -cu local_mount_point
This command lists the process IDs and user names of all processes
currently using the mounted directory.
3. To kill all processes that are using the mounted directory, enter the
following command:
/usr/sbin/fuser -ck local_mount_point
4. To unmount all NFS mounted directories, enter the following
command:
/usr/sbin/umount -aF nfs
5. To disable the NFS client and Autofs, edit the
/etc/rc.config.d/nfsconf file on the client to set the NFS_CLIENT
and AUTOFS variables to 0, as follows:
NFS_CLIENT=0
AUTOFS=0
This prevents the client processes from starting up again when you
reboot the client.
6. Enter the following command to disable NFS client capability:
/sbin/init.d/nfs.client stop
For more information, see umount (1M), mount (1M), and fuser (1M).