Migrating X.25 over ACC to X.25 over PSI

Step 5: Configure all the ports to be used for X.25 over PSI adapter using SAM or SMH. This

creates the X.25 configuration file and the X.25 device for each X.25 interface on the PSI adapter.

For more information on configuring X.25 using SAM or SMH, see HP X.25/9000 User’s guide

available at:

http://docs.hp.com/en/netcom.html#X.25

Note: - Apart from the X.25 configuration file, there is no separate configuration file required for

the X.25 subsystem configuration, as was required to bring up the ACC subsystem incase of

X.25/ACC along with the X.25 configuration file.

Step 6: Verify the X.25 link to check if it is up and running using the x25ifstate command.

For more details on X.25 commands and how to manage X.25/PSI, see the X.25 User guide

available at:

http://docs.hp.com/en/netcom.html#X.25

Configuration file for an X.25 interface over ACC

Following is the generic configuration file for an X.25 interface over ACC:

#@(#)NACC x25init.sample $Rev: /main/3 $"

x.121 35011

x.121_packetaddr 35011

device zx25m0p0

name x25_interface_name

# Level 2 Parameters

t1 3000

t3 60000

framesize 149

n2 20

l2window 7

# Level 3 Parameters

networktype DTE_88

# Circuit Table Definition

# LCI TYPE HOW MANY

lci 1 svc 255

# Flow Control, Throughput Class, Fast Select and Reverse Charge Settings