Installing and Administering OSI Transport Services

142 Chapter 6

HP OTS/9000 Conﬁguration Files

To Create A New File Set

where is may read or write conﬁguration information.

This means that you can also select a ﬁle set that is not

active and conﬁgure it.

To select an alternate ﬁle set, enter the directory into

the “Conﬁguration File Set Path” ﬁeld on the “Set

Conﬁguration Mode” pop-up screen. When working

with an alternate ﬁle set, osiconf will prompt you to

enable or disable the local parameter checks. These

checks verify the parameter values against the

conﬁguration of the current node. You should disable

local checks when editing the conﬁguration of another

machine node.

osiconfchk Provides quick veriﬁcation of OTS conﬁguration

information. If defaults to the active ﬁle set based on

the value in OSI_CONFIG environment variable.

Also allows you to verify any OTS conﬁguration ﬁle set

by specifying the directory of an alternate ﬁle set for it

to read. You specify the location of the conﬁguration

ﬁles you want to work with by using the -D option. This

setting is independent of /etc/opt/ots/conf or the value

of OSI_CONFIG. If using an alternate ﬁle set, you may

wish to suppress the local checks by using the -l option.

Refer to the osiconfchk man page for more information.