Installing and Administering OSI Transport Services

Chapter 5 125
Configuring and Verifying HP OTS/9000
To Add HP OTS/9000 CLNS Over X.25
To Add HP OTS/9000 CLNS Over X.25
1. Under CLNS over X.25 highlight “Add” and press “Select Item” or
[return].
2. Enter the following parameters from your Local Parameter
Worksheet for this subnetwork.
a. Enter the Subnetwork Name from line 1.
b. Enter a Network ID, if applicable, from line 3.
c. Enter Local Network Address (NSAP) from line 2.
d. Enter Subaddress and X.25 Programmatic Access Name from line
5. (At least one pair is required.)
3. Press “Perform Task” f4. You will see a pop-up screen displaying “Task
completed...”
4. Press space bar to continue.
5. Press “Previous Menu” f8 to return to OTS Configuration Menu.
6. Look at the OTS Configuration flowchart to determine the next task
you should perform.
Perform these tasks for each CLNS over X.25 subnetwork. The line
numbers above refer to those on the worksheet.