Installing and Administering OSI Transport Services

106 Chapter 4

Installing HP OTS/9000

If Not On HP-UX 10. 30

If you already have an HP-UX 9.x system running HP OTS/9000 and

would be installing 10.30 or later on your system, you will need to

backup your conﬁguration and data ﬁles before cold-installing 10.x on

your system.

The conﬁguration ﬁles for HP OTS/9000 on a 9.x system reside in the

directory /etc/net/osi/conf. Backup all the ﬁles in this directory

before installing 10.30.

1. Install HP-UX 10.x on your system. See the manual Upgrading from

HP-UX 9.x to 10.x for detailed instructions.

2. After installing HP-UX 10.30, restore all the HP OTS/9000

conﬁguration ﬁles from the backup. These conﬁguration ﬁles may be

restored to their 9.x location, /etc/net/osi/conf.

3. Now install HP OTS/9000 on the 10.30 system. When the system

reboots after installation, the conﬁguration ﬁles will be moved to

/etc/opt/ots/conf and will be converted to the 10.30 format. The

9.x directory /etc/net/osi will be removed upon completion of the

installation.