Installing and Administering FTAM/9000

Chapter 3 69
Verifying HP FTAM/9000
Verification Overview
To verify the HP FTAM/9000 configuration
This local connection test is to verify that HP FTAM/9000 is configured
correctly.
1. If you are in the osiadmin program, press f8 until the osiadmin Main
menu is displayed.
If you exited the osiadmin program after you finished configuring
FTAM, you instead need to enter /usr/sbin/osiadmin at the system
prompt.
2. Select FTAM.
The FTAM menu is displayed.
3. Select Test Connectivity.
osidiag is loaded, and the FTAM Test Cases menu is displayed .
4. Select Connection Test ...
The FTAM Initiator Identification Parameters pop-up menu shown
below is displayed.