Installing and Administering FTAM/9000

Chapter 2 65
Configuring HP FTAM/9000
FTAM Password Types: ftam_pw
FTAM Password Types: ftam_pw
The following parameters are used to specify how the password is
encoded and sent in the Protocol Data units (PDUs). The password can
be sent as either octet strings or graphic strings. If the ftam_pw file is
not present or if the parameters contain invalid values, FTAM
applications uses a default behavior. The default behavior is to encode
and send the passwords as octet strings.
Most responder implementations allow passwords to be encoded and
sent as either octet or graphic strings. Therefore the contents of this file
do not normally require any changes. But, when interoperating with a
remote system that supports only graphic string passwords, the
parameters in this file need to be changed suitably.
ftam_responder This parameter specifies the name of the remote
host. The password type is specified in the
filestore_pw parameter.
FORMAT ASCII string
UNIT NA
RANGE NA
DEFAULT NA
OSICONF no
DYNAMIC yes
SCREEN NA
FIELD NA