Installing and Administering FTAM/9000

54 Chapter 2
Configuring HP FTAM/9000
FTAM Remote Parameters: remote_app
ae_remote_paddr This parameter is the remote Presentation
Address for this application.
FORMAT ASCII string
UNIT NA
RANGE The parameter has the form:
P-sel.S-sel.T-sel.NSAP1.NSAP2...NSAP8
where:
P-sel - Presentation selector (0-32 hexadecimal
digits)
S-sel - Session selector (0-32 hexadecimal digits)
T-sel - Transport selector (0-64 hexadecimal digits)
Each selector must be an even number of digits.
Absent selectors (0 length) are treated as nell
selectors. In this case, the period (.) between
selectors must still be included. For example 31..30
indicates a null S-sel, 31.30. indicates a null T-sel.
NSAP # - Network Address (0-40 hexadecimal
digits) 1 - 8 NSAPs may be specified. When
multiple NSAPs are given, the ACSE layer of
FTAM will attempt to connect with NSAP1. If (and
only if) the connect fails, will NSAP2 be tried until
all NSAPs are tried. Omit any unused NSAP slots
including period(.). For example: 32.31.30.123456
specifies one remote NSAP, 123456.
DEFAULT none
OSICONF yes