Installing and Administering FTAM/9000

26 Chapter 2
Configuring HP FTAM/9000
Configuration Parameters
FTAM Remote Responder Parameters
NOTE The Presentation, Session, and Transport selectors, along with the list of
remote systems NSAPs, are combined to form the Remote Responder's
Presentation Address.
Maximum number
of associations
50
Description This required parameter sets the number of
connections that the local FTAM Responder can
service at any one time.
Format decimal number
Valid value 1 to 100
Default value 50
Remote
responder’s alias
Description This parameter is the hostname of the remote node. It is
used by ftam, fcp, and other FTAM applications to
identify the system that a file is to be copied from or to.
This parameter is then inserted into a Directory
Distinguished Name (DDN), as shown in the following
example.
Example With an alias value of myhostname, the DDN of the
local responder becomes the
following:/O=org_name/OU=org_unit/OU=myhostname/
AP=ftam/AE=resp
Format alphanumeric character string
Valid value any string of ASCII characters
Default
value
none