Installing and Administering FTAM/9000

Chapter 2 25
Configuring HP FTAM/9000
Configuration Parameters
NOTE The Presentation, Session, and Transport selector values are combined
to make the Responder Presentation Address. The NSAP portion of the
Presentation Address is the NSAP configured for the local node, which is
added automatically by the configuration program.
Presentation
selector (hex
string)
0001
Description This parameter is the Presentation selector portion
of the Responder's Presentation Address.
Format hexadecimal string
Valid value 2 to 40 digits (must be an even number of digits)
Default value 0001
Session selector
(hex string)
0001
Description This parameter is the Session selector portion of the
Responder's Presentation Address.
Format hexadecimal string
Valid value 2 to 40 digits (must be an even number of digits)
Default value 0001
Transport selector
(hex string)
0001
Description This parameter is the Transport selector portion of
the Responder's Presentation Address.
Format hexadecimal string
Valid value 2 to 64digits (must be an even number of digits)
Default value 0001