HP-UX VLAN Administrator's Guide, February 2007

Deleting a VLAN Interface
The following procedure describes how to delete a VLAN interface.
1. On the main VLAN page, select a configured VLAN interface, and select Delete VLAN. This
opens the Delete VLAN Interface confirmation page, as shown in Figure 2-5.
2. If the Critical Resource Analysis (CRA) report passes, delete the selected VLAN interface
by clicking OK. If the CRA report indicates that applications are running or that an IP address
is configured on this VLAN interface, you must stop the applications and delete any
associated IP address.
To delete any associated IP address of the VLAN interface, from the main VLAN
configuration page, select the VLAN interface and then select Delete IP Interface.
As needed, consult the online help for information about this action.
Figure 2-5 Deleting a VLAN Interface
Deleting a VLAN Interface 37