HP-UX VLAN Administrator's Guide, February 2007

Modifying a VLAN Interface
After you configure a VLAN, you can modify its properties whether or not it has an IP address
configured. On the main VLAN page, select a configured VLAN interface, and select View/Modify
VLAN. This opens the View/Modify VLAN page, as shown in Figure 2-4. Modify fields as needed.
The fields (except for VPPA, which can not be modified) are the same as those discussed in the
section “Adding a VLAN Interface” (page 41). As needed, consult the online help for specific
information about this action.
Figure 2-4 Viewing or Modifying a VLAN Interface
36 Using HP SMH to Configure and Administer HP-UX VLANs