HP-UX TN3270 Release Notes, February 2007

HP-UX TN3270 Release Notes for R7.11.31.001
Compatibility Information and Installation Requirements
Chapter 1 7
Compatibility Information and Installation Requirements
The following section lists the installation requirements for the TN3270 product.
Installation Requirements
After determining that you have the hardware, software and host requirements for the
TN3270 product, you will need to load the TN3270 product files as follows:
Step 1. Be sure that you have a CD-ROM drive attached to your system to read the product
file. This drive should be configured on your system with an entry in the /dev
directory.
Step 2. Use swinstall to load the TN3270 product. Refer to the man pages of the HP-UX
system for instructions on how to do this.
Step 3. Once you have loaded the TN3270 product file, you can use the swverify command
to verify that TN3270 has been correctly installed.
NOTE The configuration files for R7 are the same as for R6.