HP-UX Networking Ports Reference Guide (February 2009)

Chapter 2
Services
Services and Ports
40
SrpSiteDaemon 6178 TCP acceSS7 Statistics Remote Site Query Daemon
SrpCentralDae
mon
6179 TCP acceSS7 Statistics Central Server Query Daemon
ssh 22 TCP HP-UX Secure Shell
SSH uses this port by default. An administrator can
configure SSH to use a different port.
SSL 443 TCP HP Apache
Secure Socket Layer (SSL)
sunrpc 111 TCP/UDP SUN Remote Procedure Call
supdup 95 TCP
svrloc 427 TCP Server Location
NOTE: The svrloc service is not available for the HP-UX
11i v1 operating system.
UDP
swagentd 2121 TCP/UDP HP Software Distributor Daemon
Used for communication between systems for software
installation, listing, or other sw commands.
swat 901 TCP SAMBA Web-based Admin Tool
Used by the HP CIFS product (equivalent to the open
source SAMBA product). If CIFS is not being used, this
service can be disabled in the /etc/inetd.conf file.
syslogd 514 UDP Network System Logging
systat 11 TCP Active Users, also called users
talk 517 UDP Talk, Conversation
tcpmux 1 TCP TCP port service multiplexer
Not common on HP-UX.
You can edit the /etc/inetd.conf file to comment out or
disable this service.
tempo 526 TCP New Date
tftpd 69 UDP Trivial File Transfer Protocol
Found on systems that have Ignite/UX installed. This
service should function only if the host is being used as a
tftp server. If you want to disable this service, edit the
/etc/inetd.conf file.
Table 2-1 Services in the HP-UX 11i v1, 11i v2, and 11i v3 Operating Systems
Service
Port/Port
Range
Protocol Description