HP-UX Networking Ports Reference Guide (February 2009)

Chapter 2
Services
Services and Ports
38
radacct 1813 UDP RADIUS Protocol
Used by the AAA RADIUS Server. See Chapter 3,
“Additional Information,” on page 43 for references to AAA
RADIUS documentation.
radius 1812 UDP RADIUS Protocol
Used by the AAA RADIUS Server. See Chapter 3,
“Additional Information,” on page 43 for references to AAA
RADIUS documentation.
recserv 7815 TCP SharedX Receiver Service
Used to share an X-Windows display from another system.
You can disable this service in the /etc/inetd.conf file.
Registered Ports 1024-49151 n/a Registered Ports are listed by the IANA. On most systems
Registered Ports can be used by ordinary user processes or
programs executed by ordinary users. Registered Ports are
used in TCP (RFC793) to name the ends of logical
connections that carry on long conversations. To provide
services to unknown callers, a registered service contact
port is defined. This list specifies the ports used by services
as contact ports.
registrar 1712 TCP/UDP Resource Monitoring Service
Part of the resource monitoring subsystem.
remotefs 556 TCP Brunhoff Remote Filesystem
rfa 4672 TCP NS Remote File Access
RIPng 521 TCP/UDP Route Information Protocol Next Generation
RIPng is used with IPv6 only.
rje 5 TCP/UDP Remote Job Entry Service
Not common on HP-UX.
You can edit the /etc/inetd.conf file to comment out or
disable this service.
rje 77 TCP Private Remote Job Entry Service
rlb 1260 TCP Remote Loopback Diagnostic
rlp 39 UDP Resource Location Protocol
route 520 UDP Routing Information Protocol
ideafarm-catch 903 UDP IDEAFARM-CATCH
rpcd 135 TCP Distributed Computing Environment (DCE) based RPC
rpcbind 111 rpcbind
Table 2-1 Services in the HP-UX 11i v1, 11i v2, and 11i v3 Operating Systems
Service
Port/Port
Range
Protocol Description