HP-UX Internet Services Administrator's Guide (August 2003)

Troubleshooting Internet Services
Troubleshooting Tips
Chapter 5114
2C5. Fix $HOME/.netrc. If the file is incorrect, make
corrections to it and go to 2C6.
2C6. After you have made the corrections, repeat this
flowchart beginning with 2A.
2D. See the node manager. If your system was denied
access to the server system by the
/var/adm/inetd.sec file, but you want to use the
server, contact the node manager of the server system
and request access.
2E. Go to Flowchart 3. If you are using the Berkeley
Services (sendmail, BIND, finger, the rexec library,
or any of the “r” services), go to Flowchart 3 to begin
troubleshooting the security for those services.
2F. telnet should work. If you have reached this point in
the flowchart, the telnet server exists and you have
access to the system. If you are using correct syntax, if
the login password you are using exists on the server
system, and if none of the error messages have solved
the problem, report the problem to your
Hewlett-Packard support contact.
2G. See the node manager. You are not allowed to use ftp
to access the server system. Check with the node
manager of the server system and request that the
appropriate user name be removed from the
/etc/ftupusers file.
2H. ftp should work. If you have reached this point in the
flowchart, the ftp server exists and you have access to
the system. If you are using correct syntax and none of
the error messages have solved the problem, report the
problem to your Hewlett-Packard support contact.