HP Fabric Clustering System HP-UX Administrator's Guide, March 2008

cli = 1
ospf = 2
rip = 3
snmp-agent = 4
stp = 5
vlan = 6
vrrp = 7
ib = 8
fc = 9
chas-mgr = 10
port-mgr = 11
tcp = 12
notifier = 13
ip-mgr = 14
fib-mgr = 15
srp-mgr = 16
srp-agent = 17
watchd-mgr = 19
watchd-agent = 20
port-agent = 21
ip-agent = 22
fib-agent = 23
card-agent = 25
ib-sm = 26
diag-mgr = 27
diag-agent = 28
NOTE: Command completion only works for commands; it is not effective for keywords.
Command Abbreviation
To facilitate command entry, CLI commands do not have to be entered in their entirety. You
may enter just enough of each command or argument to make it uniquely identifiable.
For example:
HP-IB(config)# fc ?
srp - Configure FC SRP
srp-global - Configure FC SRP-global parameters
HP-IB(config)# fc srp- ?
enable - Enable FC SRP
gateway-portmask-pol - Configure FC SRP-global gateway-portmask-policy
itl - Configure FC SRP-global ITL
lun-policy - Configure FC SRP-global lun-policy
target-portmask-poli - Configure FC SRP-global target portmask policy
HP-IB(config)# fc srp- gate ?
restricted - Configure FC SRP gateway-portmask-policy restricted
HP-IB(config)# fc srp- gate res ?
<cr>
HP-IB(config)# fc srp- gate res
In the preceding example, srp- is short for srp-global, gate is short for gateway-portmask-pol,
and res is short for restricted (some gateway functions are not supported by HP Fabric).
Quick Help
You can enter the question mark (?) at the CLI prompt to display help information.
1. Enter a question mark (?) at the CLI prompt at any time to display the commands you can
execute. Only the commands appropriate to the current mode and user login are displayed.
2. You may also enter part of a command string, followed by a space and a question mark, to
display the choices for completing that command string.
Switch Administration and Management 77