HP Fabric Clustering System HP-UX Administrator's Guide, March 2008

Output Example:
LAN INTERFACE EXTENDED MIB STATISTICS DISPLAY
Wed, May 19,2004 12:33:42
Interface Name = lan9000
PPA Number = 9000
Description = lan9000 Hewlett-Packard IPoIB interface
Interface Type(value) = infiniband(199)
MTU Size = 2044
Speed = 10000 Mbits/Sec
Station Address = 0x0000040dfe800000000000000002c902000004e1
Administration Status = up
Operation Status = up
Last Change = Tue May 18 13:21:45 2004
Inbound Octets = 87686872019
Inbound Unicast Packets = 70881852
Inbound Multicast Packets = 0
Inbound Broadcast Packets = 145
Inbound Discards = 0
Inbound Errors = 0
Inbound Unknown Protocols = 5
Outbound Octets = 61886639509
Outbound Unicast Packets = 60868643
Outbound Multicast Packets = 0
Outbound Broadcast Packets = 11937
Outbound Discards = 1289
Outbound Errors = 0
Counter Discontinuity Time = Tue May 18 12:43:48 2004
Physical Promiscuous Mode = false
Physical Connector Present = true
Interface Alias =
Link Up/Down Trap Enable = enabled
lanadmin Command Help There are two help options available for the lanadmin command:
• Brief Help
• Extended Help
Brief Help Description: This command displays an abbreviated version of help for the lanadmin
command.
Syntax: lanadmin -x -h [ipoib_ppa]
Syntax Example: lanadmin -x -h 9000
Output Example:
lanadmin [-x if_info <ipoib_ppa>]
[-x link_info <ipoib_ppa>]
[-x all_if_info <ipoib_ppa>]
Use the "-H" sub-option for extended help.
Extended Help Description: This command displays a detailed version of help for the lanadmin
command.
Syntax: lanadmin -x -H[ipoib_ppa]
Syntax Example: lanadmin -x -H 9000
Output Example:
lanadmin [-x if_info <ipoib_ppa>]
[-x link_info <ipoib_ppa>]
[-x all_if_info <ipoib_ppa>]
if_info: display ipoib interface parameter
link_info: display ipoib interface's link information
all_if_info: display all ipoib interface’s information
70 Administration and Management