HP Fabric Clustering System HP-UX Administrator's Guide, March 2008

Receive Packets : 0
========================================================================
Resetting Statistics Description: This parameter resets statistics for all specified adapters. If an
adapter is not specified using the -i parameter, the -r command resets statistics for every HP
Fabric interface configured on the host.
NOTE: You must be logged in as super user to execute this command.
Syntax: itutil -r [-i interface name|-t transport type]
Syntax Example: itutil -r
Output Example:
Successfully reset the transport and performance counters on the IA "ib0"
Displaying Connectivity Information Using Itutil
Displaying Reliable Connection Details Description: This parameter displays reliable connection
details for all specified adapters. If an adapter is not specified using the -i parameter, the -c
command displays reliable connection details for every HP Fabric interface configured on the
host.
Syntax: itutil -c [-i interface name|-t transport type]
Syntax Example: itutil -c
Output Example:
========================================================================
Number of Interface Adapters on this node: 1
========================================================================
General Information:
========================================================================
Interface Adapter Name : ib0
IA Type : IB (Low Profile)
H/W Path : 0/4/1/0/0/0
Transport Type : IT_IB_TRANSPORT
IT API Version Number : 1.0
IA Software Version Number : 1.0
IA Firmware Version Number : 3.1.0
Firmware Type : Performance
IA supported transport service types : IT_RC_SERVICE
Number of Spigots(Ports) on IA : 2
Spigot specific Information
Spigot identifer : 1
Spigot online : YES
Num Network Addresses : 1
Primary Network Address : fe80::ca07:2001
Spigot identifer : 2
Spigot online : NO
Num Network Addresses : <Unassigned>
========================================================================
Connection Information :
HP-UX Host Administration and Management 63