HP Fabric Clustering System HP-UX Administrator's Guide, March 2008

Displaying Interfaces with Specified Transport Type Description: This parameter only displays
interfaces of a specific transport type. The only supported transport type with this version of the
product is IB.
Syntax: itutil -t [transport_type]
Syntax Example: itutil -t IB
Output Example:
========================================================================
Number of Interface Adapters on this node: 1
========================================================================
Interface Adapter Name : ib0
IA Type : IB (Low Profile)
H/W Path : 0/4/1/0/0/0
Transport Type : IT_IB_TRANSPORT
IT API Version Number : 1.0
IA Software Version Number : 1.0
IA Firmware Version Number : 3.1.0
Firmware Type : Performance
IA supported transport service types : IT_RC_SERVICE
Number of Spigots(Ports) on IA : 2
Spigot specific Information
Spigot identifer : 1
Spigot online : YES
Num Network Addresses : 1
Primary Network Address : fe80::ca07:2001
Spigot identifer : 2
Spigot online : NO
Num Network Addresses : <Unassigned>
========================================================================
Displaying Statistics Description: This parameter displays statistics for all specified adapters.
In the example below, the HP Fabric interface adapter is specified as ib0 and defined with the
-i parameter. If an adapter is not specified using the -i parameter, the -s command displays
statistics for each HP Fabric interface configured on the host.
NOTE: The transport statistics are the same as those defined in Chapter 10 of IBA 1.1 Vol 1.
Link/physical statistics are the same as the PortCounter attribute defined in Chapter 16 of the
IBA 1.1 Vol 1.
Syntax: itutil -s [-i interface name|-t transport type]
Syntax Example: itutil -s -i ib0
Output Example:
========================================================================
Number of Interface Adapters on this node: 1
========================================================================
Interface Adapter Name : ib0
IA Type : IB (Standard)
H/W Path : 0/4/1/0/0/0
Transport Type : IT_IB_TRANSPORT
IT API Version Number : 1.0
IA Software Version Number : 1.0
IA Firmware Version Number : 3.1.0
Firmware Type : Performance
IA supported transport service types : IT_RC_SERVICE
HP-UX Host Administration and Management 61